Block 0
|0 gwei

#1 MEV Bot — Sandwich Attacks & Flash Loan Arbitrage

Our MEV bot, known as JaredFromSubway, is the most profitable on Ethereum — 5,900+ ETH net profit since March 2023.

Multi-layer sandwich attacks, cross-DEX flash loan arbitrage, and front-running strategies. 60%+ block presence, 99.9% builder bribe rate. Subscription $10,000/yr or source code from $20,000.

Contract0x1f2F...f387
Profit or refund guaranteed
Wallet proof
24/7 support
EigenPhi verified
5,900+ ETH
Total Profit
60%+
Block Presence
40K+
Sandwiches
99.9%
Builder Bribe Rate

All metrics independently verified by EigenPhi and on-chain via Etherscan

What Do You Get with JaredFromSubway MEV Bot?

Your license gives you access to our MEV bot — the same one that generated 5,900+ ETH in profit. Here's what to expect.

8–11%
Estimated daily return (both strategies)

Higher % at lower balances, stabilizes as capital grows. Use the calculator below for your estimate.

24/7
Automated operation

Our MEV bot scans the mempool around the clock. No manual intervention needed. Executes opportunities automatically.

Zero Risk
On failed bundles

Bundles either execute profitably or revert with zero gas cost. You only pay gas when you make money.

Profit Sources

  • Sandwich attack profit from price manipulation
  • LP fees from JIT liquidity positions
  • Arbitrage tail profit after each sandwich
  • Flash loan arbitrage across DEX pools
  • Cross-pool price discrepancy capture

What's Included

  • Full MEV bot access with all strategies enabled
  • Web terminal for real-time monitoring
  • Strategy configuration (enable/disable each)
  • Withdraw profits anytime from your dashboard
  • Chat directly with our team via support tickets in your dashboard

Best MEV Bot: How Does JaredFromSubway Compare?

Our MEV bot vs typical bots on Ethereum. All our metrics are verifiable on-chain.

FeatureJaredFromSubwayTypical MEV Bots
Sandwich Layers5-layer, 7-layer1-2 layers only
Builder Bribe Rate99.9%40%
Peak Block Presence60%+<10%
JIT LiquiditySwap-JIT comboNone
Uniswap V3 AccessDirect pool calls (no NFT)Via PositionManager (slow)
Net Profit (since 2023)5,900+ ETHUnknown — no public proof
Dual-Purpose TXsYes — multi-sandwich per TXNo — single strategy only

MEV Bot Profit Estimator — How Much Can You Make?

Estimate your potential returns based on strategy and wallet balance. Is a MEV bot profitable? These estimates are based on JaredFromSubway's historical performance — actual results may vary depending on market activity and capital deployed.

ETH
Enter your wallet balance to see estimated returns

How Much Does JaredFromSubway MEV Bot Cost?

MEV bot pricing starts at $10,000/yr for a managed subscription. Want the full MEV bot source code? Purchase individual strategies from $20,000 or both for $30,000 one-time. No free MEV bot can match JaredFromSubway's infrastructure and track record.

Limited to 50 users per year to maintain profitability and low competition
Frontrunning Source
$20,000
one-time

Sandwich attacks, front-running, multi-layer bundle strategies.

Included
  • Multi-layer sandwich (5 & 7 layer)
  • Split-front-run multi-victim
  • Full Solidity contract source
  • Bot code + deploy scripts
  • Video tutorials + live chat support
Refund Guarantee
Full refund if no profit in 14 days. Policy
Get Source Code
Arbitrage via Flash Loans
$20,000
one-time

Cross-DEX flash loan arbitrage and JIT liquidity strategies.

Included
  • Flash loan arbitrage across DEXs
  • JIT liquidity combos
  • Full Solidity contract source
  • Bot code + deploy scripts
  • Video tutorials + live chat support
Refund Guarantee
Full refund if no profit in 14 days. Policy
Get Source Code
SAVE $10K
Both Strategies Source Code
$30,000
one-time

Complete source code — frontrunning + arbitrage via flash loans.

Included
  • Everything from both packages
  • Full Solidity contract source
  • Complete bot + deploy scripts
  • Lifetime code updates
  • Video tutorials + live chat support
Refund Guarantee
Full refund if no profit in 14 days. Policy
Get Both — Save $10K

Active MEV Bot Contracts

Some of our active users. Each contract is independently verifiable on Etherscan.

Wallet Ownership Proof

Still have doubts? Here is the legit proof — a live screen recording of the JaredFromSubway MetaMask wallet showing full ownership of the contract. No tricks, no edits, fully verifiable on-chain.

Contract 0x1f2F...f387 — verify ownership yourself on Etherscan

The Team Behind JaredFromSubway MEV Bot

Engineers, researchers, and traders building the most profitable MEV infrastructure on Ethereum.

JFS
JaredFromSubway Team
Smart contracts, low-latency infrastructure, strategy research, mempool analysis, and client support.

Operating since March 2023.

How Do I Start Using JaredFromSubway MEV Bot?

Choose subscription for managed MEV extraction, or purchase source code for full ownership.

Subscription License

$10,000/year

Best for: traders who want MEV profits without managing infrastructure.

  1. 1.Create your account
  2. 2.Choose your plan & complete payment
  3. 3.Receive your access key & deposit ETH to your contract
  4. 4.MEV bot runs on our servers — you monitor & withdraw profits
Included:
All strategies • Video tutorials • Chat with our team via dashboard • 24/7 monitoring

Source Code Purchase

From $20,000

Best for: developers who want full control and ownership of the source code.

  1. 1.Create your account
  2. 2.Choose: Frontrunning ($20K), Arbitrage ($20K), or Both ($30K)
  3. 3.Receive full source code & deploy contracts
  4. 4.Run on our infrastructure or your own servers
Included:
Video tutorials • Chat with our team via dashboard • Lifetime updates

MEV Bot Dashboard & Terminal

Your MEV bot runs 24/7 on our infrastructure. Control everything through our web-based terminal.

Full Bot Control

Start and stop the MEV bot, enable/disable strategies, view live logs, withdraw profits.

Real-Time Monitoring

Watch transactions execute live. See profit/loss per trade, gas costs, success rates.

Secure Authentication

Private key authentication. Encrypted sessions. Only you can access your bot instance.

Strategy Configuration

Enable/disable strategies on the fly. Adjust parameters like profit threshold, gas limits.

Live MEV Bot Execution Feed

Real-time bundle submissions from our production MEV bot. Subscription License users get a dedicated instance on our managed infrastructure, controlled through the remote terminal.

What is a MEV Bot and How Do MEV Bots Work?

A MEV bot (Maximal Extractable Value bot) is automated crypto trading software that extracts profit by reordering, inserting, or censoring transactions within an Ethereum block. MEV bots work by monitoring the mempool for pending trades and constructing profitable transaction bundles submitted via Flashbots. AI-powered MEV bots like JaredFromSubway use machine learning to optimize gas bidding and strategy selection in real-time. JaredFromSubway is the most profitable MEV bot on Ethereum — specializing in multi-layer sandwich attacks, JIT liquidity, and cross-DEX arbitrage with 5,900+ ETH in net profit since March 2023.

Mempool Monitoring

When you submit a swap to Uniswap, it enters the public mempool before inclusion. Your calldata is visible: token addresses, amountIn, amountOutMin, deadline. MEV bots decode this to calculate your slippage tolerance and determine if you're profitable to sandwich.

Bundle Construction

Bots construct bundles: [attacker_tx, victim_tx, attacker_tx]. The bundle is atomic - all execute or none. Front-run sizes are calculated from victim slippage: push price just enough that victim still gets amountOutMin. Too aggressive = victim reverts = bundle fails.

Builder Submission

Bundles go to block builders (Beaverbuild, Titan) via bundle APIs. Include a coinbase transfer as tip. Builders include highest-paying bundles. If your bundle isn't included or reverts, you pay zero gas. Competition is on tip amount, not gas price.

jaredfromsubway.eth Stats
MEV revenue (since March 2023)82,679 ETH
Net profit after gas5,900+ ETH
Peak block presence60%+
Sandwiches (Jared 2.0)40,000+

All transactions verifiable on Etherscan and EigenPhi.

What Techniques Does JaredFromSubway MEV Bot Use?

Six core techniques powering our MEV bot. All verifiable on-chain.

Multi-Layer Sandwiches

Jared 2.0 signature technique: 5-layer and 7-layer sandwiches that trap multiple victims in a single bundle. Uses liquidity add/remove operations as front and back pieces instead of simple swaps. Bundles multiple token pairs with arbitrage at the end.

5-layer attacks7-layer attacksLiquidity manipulationMulti-victim bundles
Learn more →

JIT + Sandwich Combo

Combines JIT liquidity with sandwich attacks in the same bundle. Add concentrated liquidity before victim tx, collect fees from their swap, then remove liquidity after. Three transactions, two attack types, one atomic bundle.

Swap-JIT sandwichSplit-front-runUniswap V3 poolsAtomic execution

Arbitrage Tails

Every sandwich bundle ends with arbitrage. After manipulating prices with the sandwich, capture any remaining price discrepancies across pools. Uniswap V3 concentrated liquidity pools are the primary venue. Atomic execution ensures profit or revert.

Bundle tail arbUniswap V3 poolsUSDT/WETH pairsAtomic execution
Learn more →

Split-Front-Run

When multiple victims have pending swaps, split the front-run across multiple transactions. Each front-run is sized precisely for each victim's slippage tolerance. Single back-run collects from all victims. Maximizes extraction per bundle.

Multi-victim targetingSlippage calculationSingle back-runGas optimization
Learn more →

Direct Pool Interaction

Bypasses NonfungiblePositionManager to call UniswapV3Pool.mint() and burn() directly. Skips NFT position tracking for lower gas costs. Custom callbacks handle liquidity operations. Harder to analyze and track.

Direct mint/burnNo NFT overheadCustom callbacksGas savings

Dual-Purpose Transactions

Single transactions serve multiple sandwiches across V2 and V3 pools simultaneously. One TX can be the front-run for a V3 JIT sandwich AND a V2 swap sandwich. Reduces total transactions needed and gas costs.

V2 + V3 combosTX reuseBlock space efficiencyCost reduction
Learn more →

How Does JaredFromSubway MEV Bot Work?

How our Jared 2.0 contract actually works. Real techniques, real on-chain results.

Technique 1: Swap-JIT Sandwich

Combines liquidity manipulation with traditional sandwich in one atomic bundle.

1.Swap tokens to move pool price (front-run)
2.Add concentrated liquidity via direct pool call
3.Victim tx executes at degraded rate
4.Remove liquidity + collect fees (back-run)
Bypasses NonfungiblePositionManager NFT minting - direct pool interaction
Technique 2: Split-Front-Run

Splits front-run across multiple transactions to accommodate multiple victims.

1.TX1: Partial front-run sized for Victim A slippage
2.Victim A tx executes, pushes price further
3.TX2: Second front-run sized for Victim B
4.Victim B tx executes
5.Single back-run collects from both victims
Front-run amounts calculated from victim slippage tolerance
Technique 3: Dual-Purpose Transactions

Single transaction serves multiple sandwiches across V2 and V3 pools.

Example: Block 18563314
3 attacker txs occupy 6 positions → execute 2 sandwich types
The same attacker transactions serve as front-runs for both a Swap-JIT sandwich (V3) and a Split-Front-Run sandwich (V2) simultaneously.
Reduces gas costs and block space usage vs separate attacks
Technique 4: Direct Pool Calls

Bypasses standard interfaces for gas optimization and attack obfuscation.

NonfungiblePositionManager.mint()
NonfungiblePositionManager.increaseLiquidity()
Direct UniswapV3Pool.mint() via custom contract
Direct UniswapV3Pool.burn() via custom contract
Skips NFT position tracking - harder to analyze, lower gas
Bundle Construction Logic
1. Victim Detection

Monitor mempool for pending swaps. Decode calldata to extract: token pair, amount, slippage tolerance, deadline.

2. Profit Simulation

Fork state at pending block. Simulate sandwich with victim tx included. Calculate: revenue - gas - builder tip. Reject if negative.

3. Bundle Submission

Construct bundle: [front-run, victim, back-run]. Set coinbase transfer (99.9% of profit). Submit to Beaverbuild + Titan.

How to Build a MEV Bot — Or Buy One That Already Works

Every MEV bot tutorial on GitHub teaches you the basics — mempool monitoring, sandwich logic in Solidity, Flashbots integration. But to create a MEV bot that actually profits, you need months of Solidity development, low-latency infrastructure, and competitive optimization against established bots. Most open-source MEV bot code on GitHub is outdated or unprofitable. Here's what building from scratch actually takes vs. buying JaredFromSubway's proven MEV bot source code.

Build a MEV Bot Yourself

  • Write Solidity contracts for sandwich attacks, flash loan arbitrage
  • Set up low-latency RPC nodes and mempool monitoring
  • Integrate Flashbots relay and block builder APIs
  • Handle gas optimization, revert protection, MEV-Share
  • 6-12 months development time, no guaranteed profit
  • Compete against established bots with years of optimization

Buy JaredFromSubway MEV Bot

  • Battle-tested since March 2023 — 5,900+ ETH profit
  • Multi-layer sandwich attacks (5-layer, 7-layer)
  • 99.9% builder bribe rate — top priority in blocks
  • Managed infrastructure — no DevOps needed
  • Deploy in minutes, not months
  • Subscription ($10,000/yr) or source code from $20,000

JaredFromSubway MEV Bot FAQ

Deep dive into our MEV extraction architecture and strategies.

What makes jaredfromsubway.eth different from other MEV bots?

JaredFromSubway pioneered multi-layer sandwich attacks (5-layer and 7-layer) that trap multiple victims in a single bundle, unlike traditional 3-layer sandwiches that only target one victim per transaction. The JaredFromSubway MEV bot uses direct UniswapV3Pool.mint/burn calls that bypass NFT position tracking entirely, accessing concentrated liquidity positions directly for lower gas costs and harder-to-analyze execution. Dual-purpose transactions serve multiple sandwiches simultaneously in one block, improving capital efficiency. JaredFromSubway maintains a 99.9% builder bribe rate — offering 99.9% of expected profit as a tip to block builders — while competitors typically tip only 90-97%. This ultra-high bribe strategy ensures priority inclusion despite massive transaction volume. These proprietary techniques successfully disrupted EigenPhi's tracking algorithms, the leading MEV monitoring platform.

How do the multi-layer sandwiches work technically?

Traditional sandwich: front-run → victim → back-run. Jared 2.0: front-run → victim A → center piece → victim B → back-run. The center piece can be a swap, liquidity add, or liquidity remove. Each layer is sized based on each victim's slippage tolerance decoded from their pending transaction calldata.

What is the Swap-JIT sandwich technique?

Combines JIT liquidity with sandwich in one bundle. Step 1: Swap to move price (front-run). Step 2: Add concentrated liquidity via direct pool call. Step 3: Victim executes at degraded rate, you collect trading fees. Step 4: Remove liquidity (back-run). Three revenue sources: price manipulation + LP fees + arbitrage tail.

Why does the contract bypass NonfungiblePositionManager?

The standard Uniswap V3 interface mints NFTs to track liquidity positions. Jared's contract calls UniswapV3Pool.mint() and burn() directly via custom callbacks, skipping NFT creation. Benefits: lower gas costs, harder to analyze/track, faster execution. The trade-off is complexity - you need custom contract logic.

How are front-run amounts calculated?

Decode victim's pending tx to extract: amountIn, amountOutMin, path, deadline. Calculate their slippage tolerance from amountOutMin. Size your front-run so that after price impact, victim still gets exactly amountOutMin (their tx succeeds). Too large = victim reverts = your bundle fails. Too small = leaving money on table.

Why Beaverbuild and Titan specifically?

Builder relationships matter. In a 2-week period (Aug 2024), Jared 2.0 paid 851 ETH total to builders across 51K transactions - Beaverbuild received the majority. These builders consistently include Jared's bundles because of the high tip rates. Other builders receive fewer bundles because they've proven less reliable for inclusion.

What is the 99.9% bribe rate?

When submitting a bundle to block builders like Beaverbuild or Titan, MEV bots include a "coinbase transfer" — a direct ETH tip to the builder who includes the bundle. Most competing MEV bots tip between 90-97% of their expected profit. JaredFromSubway tips 99.9%, keeping only 0.1% per sandwich attack. While 0.1% sounds small, at JaredFromSubway's massive volume of 40,000+ sandwiches, the accumulated profit is substantial — 5,900+ ETH in net profit since March 2023. The ultra-high bribe rate is a deliberate JaredFromSubway strategy: by outbidding every competitor on tip percentage, the MEV bot ensures priority inclusion in blocks. Builders consistently select JaredFromSubway bundles because they receive the highest tips, creating a compounding advantage over time.

How does the MEV bot handle multiple victims in one block?

Split-Front-Run technique: TX1 front-runs Victim A (sized to their slippage). Victim A executes, pushing price further. TX2 front-runs Victim B (sized to their slippage). Victim B executes. Single TX3 back-runs both. Result: one back-run transaction collects profit from multiple victims, reducing gas overhead.

How do I build a MEV bot?

Building a MEV bot from scratch requires deep Solidity knowledge, mempool monitoring infrastructure, Flashbots integration, and months of testing. You need to write smart contracts for sandwich attacks and arbitrage, set up low-latency RPC nodes, integrate with block builders like Beaverbuild and Titan, and handle edge cases like reverts, frontrunning competition, and gas optimization. Most developers spend 6-12 months building a competitive MEV bot. JaredFromSubway offers the finished product — battle-tested since March 2023 with 5,900+ ETH in profit — so you can skip the build phase entirely.

Are MEV bots legal?

Yes. MEV bots interact with public blockchain protocols exactly as designed — there is no hacking, no unauthorized access, and no terms of service violation. Sandwich attacks, arbitrage, and JIT liquidity are standard transaction ordering strategies on Ethereum. The transactions are submitted to public mempools and executed by block builders. Major institutions, hedge funds, and top trading firms all run MEV operations on Ethereum. MEV extraction is a fundamental part of how public blockchains function.

How much does a MEV bot cost?

JaredFromSubway offers three ways to get started: a managed subscription at $10,000/year (all strategies included, bot runs on our infrastructure 24/7), individual strategy source code at $20,000 one-time (frontrunning or flash loan arbitrage), or both strategies bundled for $30,000 one-time. Every plan includes a 14-day refund guarantee, video tutorials, and live chat support. With 8-11% estimated daily returns, most operators recoup their investment within the first weeks.

Is a MEV bot profitable in 2026?

Absolutely. JaredFromSubway is the most profitable MEV bot on Ethereum with 5,900+ ETH in net profit since March 2023, all verifiable on-chain. MEV extraction is market-neutral — the bot profits from DEX trading mechanics, not price direction. Whether ETH is in a bull market, bear market, or trading sideways, people still swap tokens on Uniswap and SushiSwap, creating MEV opportunities that JaredFromSubway captures automatically. Our operators typically see 8-11% estimated daily returns.

What is the best MEV bot on Ethereum?

The best MEV bot is measured by on-chain results, not marketing claims. JaredFromSubway ranks as the top MEV bot on Ethereum by net profit (5,900+ ETH), block presence (60%+ at peak), and builder bribe rate (99.9%). Unlike other Ethereum trading bots that self-report performance, every JaredFromSubway transaction is publicly verifiable on Etherscan. The bot runs multi-layer sandwich attacks, cross-DEX arbitrage, JIT liquidity, and flash loan strategies simultaneously — making it the most comprehensive MEV bot available.

Can I use a MEV bot on Uniswap and SushiSwap?

Yes. JaredFromSubway's MEV bot monitors all major Ethereum DEXs including Uniswap V2, Uniswap V3, SushiSwap, Curve, Balancer, and PancakeSwap. The bot executes cross-DEX arbitrage by identifying price differences between these platforms and capturing the spread in a single atomic transaction. Sandwich attacks target pending swaps on any supported DEX. The bot automatically discovers new liquidity pools as they're created, ensuring coverage across the entire DeFi ecosystem.

Do I need to know Solidity to run a MEV bot?

No — not for the subscription. The $10,000/year MEV bot subscription runs entirely on JaredFromSubway's managed infrastructure. You control it through a web terminal dashboard with no coding required. However, if you want to build a MEV bot yourself or customize the source code, Solidity knowledge is essential. Our MEV bot source code packages ($20,000-$30,000) include the full Solidity contracts, bot code, and deployment scripts — ideal for developers who want to create their own MEV bot or study MEV bot architecture. We include video tutorials for both technical and non-technical users.

Are crypto trading bots profitable?

JaredFromSubway is one of the most profitable crypto trading bots ever created — 5,900+ ETH in net profit since March 2023, all verifiable on-chain via Etherscan. Our operators typically see 8-11% estimated daily returns. Unlike grid bots, DCA bots, or scalping bots that depend on market direction, JaredFromSubway's MEV strategies profit in every market condition — bull, bear, or sideways — because they exploit the mechanics of DEX trading itself.

Are crypto trading bots legit?

Most crypto bots advertised on Telegram, Discord, or Reddit are scams — they ask for your private keys, show fake screenshots, and have zero verifiable results. JaredFromSubway is the exception: every single trade executes on-chain and is publicly verifiable on Etherscan. We never ask for your private keys. The bot runs on our managed infrastructure, you control everything through a secure web terminal, and we offer a full refund guarantee if the bot doesn't generate profit within 14 days.

How do I know this isn't a scam?

Every JaredFromSubway transaction is publicly verifiable on Etherscan and independently tracked by EigenPhi, the leading MEV analytics platform. Check our full profit report at eigenphi.io/mev/ethereum/contract/0x1f2F10D1C40777AE1Da742455c65828FF36Df387 — it shows 5,900+ ETH in documented net profit since March 2023, with 82,679 ETH in total MEV revenue across 40,000+ sandwich transactions. This is not self-reported data — it's independently verified by a third-party analytics platform that tracks every MEV transaction on Ethereum. JaredFromSubway also offers a full refund guarantee if the bot doesn't generate profit within 14 days. Active operators have shared their contract addresses publicly, verifiable on the homepage.

Start Extracting MEV

The same MEV bot behind 5,900+ ETH in extracted profit. Multi-layer sandwiches, 99.9% builder bribes, 60%+ block presence. Choose Subscription License or Full Source.